Control Category; Action Mode; Method Mode; Controller Category - HP ProLiant DL360p Reference Manual

Category Options
ConnectionName
HBA
HBA_WW_ID
HostMode

Control category

The Control category has the following options:
•
Action mode (on page 77)
•
Method mode (on page 77)

Action mode

You must specify an Action mode:
•
In Configure mode, you can create new arrays, but you cannot modify existing arrays. The controller
must be connected to unassigned physical drives for this mode to be available.
•
In Reconfigure mode, you can modify existing arrays. For example, you can set up an array expansion,
a logical drive extension, or a migration. These procedures do not destroy data, unless you specifically
want the data to be deleted. In this mode, ACU does not change an existing option setting unless you
specifically script a different value for that option.
If you use the -reset command line switch, the existing controller configuration is cleared with data loss as
the first step in the configuration process. This command line switch is not compatible with Reconfigure mode.

Method mode

The default value for this option is Auto. If you want to use Custom mode, you must specify it.
In Auto mode, ACU can perform an expansion, extension, or migration without user intervention if the values
that you set for other options imply that such an operation is necessary.

Controller category

The Controller category has the following options:
•
Controller (on page 78)
•
CacheState (on page 78)
•
ClearConfigurationWithDataLoss (on page 78)
•
DeleteLicenseKey
•
DPOEnable
•
DriveWriteCache (on page 78)
•
ElevatorSortEnable
•
ExpandPriority
•
IRPEnable
•
LicenseKey
•
MNPDelay
("LicenseKey, DeleteLicenseKey" on page 79)
("Video performance options" on page 80)
("Video performance
("RebuildPriority, ExpandPriority" on page 80)
("Video performance options" on page 80)
("LicenseKey, DeleteLicenseKey" on page 79)
("Video performance options" on page 80)
Description
These options specify an HBA that is to be configured.
options" on page 80)
HP Array Configuration Utility 77