Preparing The Notebook For Disassembly - HP Compaq nc6000 - Notebook PC Maintenance And Service Manual

5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Save your work, exit all applications, and shut down the
notebook. If you are not sure whether the notebook is off or
in Hibernation, briefly press the power button. If your work
returns to the screen, save your work, exit all applications,
and then shut down the notebook.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack by following these steps:
Battery packs
Primary battery pack, Li-Ion, 6-cell, 3.6-Ah, 48-Wh
Battery pack, 6-cell
Maintenance and Service Guide
Spare Part Number Information
Removal and Replacement Procedures
338669-001
346886-001
5–5