Advertisement
Note:
You can download HP drivers and utilities, including the most current
available ROM for the platform, from the HP website
Installing the operating system and system hardware
Preparing for installation
IMPORANT:
Follow the installation instructions in the order provided. Failure to
complete these steps in the proper order can result in an unsuccessful or
unstable installation.
This section provides guidelines for users who perform a clean installation of Microsoft Windows XP
Professional x64.
Installing drivers and enhancements
Perform the following steps before manually installing Windows XP Professional x64:
Change the boot order in F10 Setup to make the optical drive the first boot device.
1.
Disable SATA Native Mode in F10 Setup (see appendix A).
2.
Boot with the Windows XP Professional x64 OS CD in the drive and follow the on-screen
3.
instructions for installation.
Note:
Contact the Network Administrators to properly set up the networking
components of Microsoft Windows XP Professional x64. For installation,
refer to the Microsoft documentation provided with Windows XP
Professional x64 for complete installation instructions.
Install the drivers and enhancement versions listed in Table 1 from the HP website at
4.
See Table 1 for additional information.
Note:
The versions listed in the white paper have been tested with Microsoft
Windows XP Professional x64. Use of versions not listed in the white paper
may result in anomalous behavior.
www.hp.com
.
.
www.hp.com
Page 3
Advertisement
