10.3 Power Supply Output Requirements; Table 46. Intel; Table 47. 350-W Load Ratings - Intel S1200BTS Specification

Design and Environmental Specifications
suggested thermal and current design values for anticipating future processor needs. The
following table provides maximum values for Icc, TDP power and T
SandyBridge Series processor.
95 W

10.3 Power Supply Output Requirements

This section is for reference purposes only. The intent is to provide guidance to system
designers to determine a power supply for use with this server board. This section specifies the
power supply requirements Intel
R1304BTLSHBN.
The following tables define two power and current ratings for this 350-W power supply. The
combined output power of all outputs should not exceed the rated output power. The power
supply must meet both static and dynamic voltage regulation requirements for the minimum
loading conditions.
Voltage
+3.3 V
+5 V
+12 V
-12 V
+5 VSB
Notes:
1. Maximum continuous total DC output power should not exceed 350 W.
2. Peak total DC output power should not exceed 400 W.
3. Peak power and peak current loading should be supported for a minimum of 12 seconds.
4. Combined 3.3 V/5 V power should not exceed 100 W.
112
® ®

Table 46. Intel

Xeon
TDP Power Maximum T
67.0º C
®
used to develop a power supply for the Intel

Table 47. 350-W Load Ratings

Minimum Continuous
0.2A
1.0 A
1.5A
0A
0.1 A
Intel order number G13326-003
Processor TDP Guidelines
Icc Maximum
CASE
150 A
Maximum Continuous
14 A
18A
24 A
0.3A
2.0 A
Intel® Server Board S1200BT TPS
®
for the Intel Xeon
CASE
®
Server System
Peak
28A
2.5 A
®
Revision 1.0