Figure 47
Fabric Watch module
The Fabric Watch navigation tree, on the left side of the module, displays the available classes. The
classes are organized in a set of folders. Not all classes are available for all switches.
You should use the Fabric Watch module if you want to:
•
Configure custom threshold values on particular elements.
•
Place limits on the acceptable values of those elements and enable the custom limits (configure
threshold boundaries).
•
Choose if and how Fabric Watch alerts you to errant values (configure alarms).
•
Choose if and how frequently Fabric Watch identifies unacceptable values (configure threshold traits).
Launching the Fabric Watch module
1.
Select a switch from the Fabric Tree.
The selected switch appears in the Switch View.
2.
Click the Watch button on the Switch View.
NOTE:
The Watch button is displayed in the Switch View only if the Fabric Watch license has been
activated.
The Fabric Watch module is displayed (see
122 Administering Fabric Watch
Fabric Watch navigation tree, lists the
available classes for the switch
Summary of actions
The last time the Fabric Watch
module was updated
Figure
47).