Creating An Sid/Did Performance Graph - HP StorageWorks 2/64 - Core Switch Administrator's Manual

Creating an SID/DID performance graph

1. Launch the Performance Monitor module as described on
2. Select Performance Graphs > Advanced Monitoring > SID/DID Performance.
The SID/DID Performance Setup dialog box opens (see
If you want to see which EE monitors are currently set up on a particular port, go to
If you want to specify the port, source ID, and domain ID, go to
Figure 54

Creating an SID/DID performance graph

Click a port from the Slot/Port or Sid/Did Selection List.
3.
a. Drag the selected port into the Enter/drag port number box.
b. Click Retrieve preset EE monitors.
The current EE monitors for that port are displayed in the Current EE monitors set for selected port
table.
c. Optional: To display a performance graph for the current EE monitors set for the selected port, click
a SID/DID pair in the table. You can select multiple source ID and Destination IDs. Click Select. If
you selected multiple SID/DID monitors, click OK in the confirmation dialog box that appears. Skip
to step 6.
If you do not want to display a performance graph for the current EE monitors set for the selected
port, continue with
4. Select a source ID from the Port or Sid/Did Selection List, and click Add Sid.
You can also enter a source ID in the Enter/drag SID number box.
Select a destination ID from the Port or Sid/Did Selection List, and click Add Did.
5.
You can also enter a destination ID in the Enter/drag DID number box.
6. Click OK.
If you selected multiple EE monitors, SIDs, or PIDs, a confirmation dialog box opens, reminding you
that one graph will be opened for each selection. Click Yes to display the graphs.
step 4.
Fabric OS 5.x Advanced Web Tools administrator guide 135
page 132.
Figure 54).
step 4.
step 3.