Configuring Internet Explorer; Setting The Refresh Frequency; Certified And Tested Platforms; Tested Platforms - HP StorageWorks 2/64 - Core Switch Administrator's Manual

Table 2

Certified and tested platforms

Operating system
Solaris 2.8
Solaris 2.9
Windows® 2000
Windows 2003
Windows XP®
In addition, HP has tested Advanced Web Tools on the platforms shown in
Table 3

Tested platforms

Operating system
Red Hat Linux® 9.0
NOTE: Some browsers must be configured to work with Advanced Web Tools. For information about
how to do this, see the section
Adequate RAM is required on Windows systems:
• 256 MB or more RAM for fabrics comprising 15 switches or less
• 512 MB or more RAM for fabrics comprising more than 15 switches
HP recommends a minimum of 8 MB of video RAM.

Configuring Internet Explorer

Correct operation of Advanced Web Tools with Internet Explorer requires specifying the appropriate
settings for browser refresh frequency and process model. Browser pages should be refreshed frequently
to ensure the correct operation of Advanced Web Tools.

Setting the refresh frequency

1. Select Tools > Internet Options in the browser.
2. Select the General tab and click Settings (under Temporary Internet Files).
3. Click Every visit to the page under Check for newer versions of stored pages, as shown in
16 Introducing Advanced Web Tools
Browser
Mozilla 1.6
Mozilla 1.6
Internet Explorer 6.0
Internet Explorer 6.0
Internet Explorer 6.0
Browser Java Plug-in
Mozilla 1.6 1.4.2_06
"Configuring Internet Explorer," next.
Java Plug-in
1.4.2_06
1.4.2_06
1.4.2_06
1.4.2_06
1.4.2_06
Table 3.
Figure 1.