HP StorageWorks 2/64 - Core Switch Administrator's Manual page 146

Table 16 Advanced Web Tools limitations when using the Mozilla browser (continued)
Problem area
Performance Monitor
module
Switch Admin, Routing tab
Telnet
Zone Admin
146 Limitations
Details
When creating performance graphs, you might not be able to drag and
drop port numbers or AL_PAs in the graph setup dialog box.
Workaround: Enter the port numbers and AL_PAs in the appropriate
fields.
When you launch Advanced Web Tools and open the Switch Admin
module for the first time, if you click the Routing tab, the FSPF route tree
nodes do not display correctly.
Workaround: Click another tab in the Switch Admin module; then
select the Routing tab again.
Mozilla browsers do not support the telnet application.
Workaround: Launch an external telnet process.
If you make changes in the Zone Admin module and then close the
module without saving your changes, your changes are lost.
If you have unsaved changes and you close the module by selecting File >
Close, you receive a message warning that your changes are not saved
and requesting confirmation before the module is closed.
If you have unsaved changes and you close the module by clicking the X
in the upper right corner of the window, you receive a warning message
only if you are using Internet Explorer. If you are using the Mozilla
browser, you do not receive this message and any unsaved changes are
lost.
Workaround: Always close the Zone Admin module by selecting
File > Close. If you have not saved your changes, for all browsers, a
warning message is displayed, requesting confirmation before the module
is closed.