Modifying An Existing Graph - HP StorageWorks 2/64 - Core Switch Administrator's Manual

4. Select File > Print All Graphs.
The print dialog box opens.
5. Click OK.

Modifying an existing graph

Use the following procedure to modify an existing graph that is saved in a canvas.
1. Launch the Performance Monitor module as described on
2. Select File > Display Canvas Configurations.
The Canvas Configuration List is displayed. The message No Canvas configuration to
display appears if there are no saved canvas configurations.
3. Select a canvas from the list and click Edit.
The Performance Monitor Canvas: Canvas Name dialog box opens.
4. Select a graph from the list and click Edit.
NOTE: The Edit button is enabled only for the graphs that are configurable or editable.
5. Make changes in the Edit dialog box, as necessary.
6. Click OK to close the Edit dialog box.
7. Click Save to save the changes and close the Performance Monitor Canvas dialog box.
8. Click Close to close the Canvas Configuration List.
page 132.
Fabric OS 5.x Advanced Web Tools administrator guide 139