Client Requirements; Hardware And Software Requirements; Configuring Internet Explorer Settings For Smh Pre-Configuration - HP Integrity rx1620 Installation Manual

• Disk space
— 14-15 MB (Installation files only)
— 200 MB in the VCRM installation drive for temporary ProLiant or Integrity Support
Pack extraction
— 2 GB for the repository. This must be on a local, writeable drive.
• System memory
— 256 MB for Windows XP and Windows Server 2003
IMPORTANT:
of the VCRM. The size of the repository depends on the files contained in the repository directory.
Each ProLiant or Integrity Support Pack executable, which is downloaded automatically if the
Auto Update feature is enabled, is approximately 100 MB in size and extracts to approximately
200 MB in size. If you are downloading multiple ProLiant or Integrity Support Packs, then you
can multiply this size by the number of ProLiant or Integrity Support Packs you are downloading
in your repository to determine how much disk space is required.

Client requirements

Minimum requirements for client access to the VCRM are outlined.

Hardware and software requirements

• Operating system
— Windows Server 2003
— Windows XP
• Browser
— Internet Explorer 6.0 with Service Pack 1 or later
— Mozilla 1.6 or later
Note: Uploading software by way of the Mozilla browser interface is not supported.
• System memory
— 256 MB of RAM for Windows XP or Windows Server 2003

Configuring Internet Explorer settings for SMH pre-configuration

Some features of the VCRM's browser interface depend on browser settings at the client system
from which the VCRM is being accessed. The security settings in Microsoft Internet Explorer
must be set to initialize the VCRM Upload process.
To configure the Microsoft Internet Explorer security settings:
1. From the Microsoft Internet Explorer toolbar, click Tools and select Internet Options. The
Internet Options dialog box appears.
2. Click Custom Level. The Security Settings dialog box appears.
3. Under ActiveX controls and plug-ins, Download signed ActiveX controls, select Enable.
4. Under Run ActiveX controls and plug-ins, select Enable.
5. Under Script ActiveX controls marked safe for scripting, select Enable.
The advanced settings in Microsoft Internet Explorer must be set to ensure that saving a copy of
the VCRM log functions when the log is cleared.
To configure the Microsoft Internet Explorer advanced settings:
1. From the Microsoft Internet Explorer toolbar, click Tools and select Internet Options. The
Internet Options dialog box appears.
2. Click the Advanced tab.
30 Installing the VCRM on Windows
The disk space requirements previously mentioned are specific to the installation