Dip Switch Settings - Oki LP470b User Manual

DIP Switch Settings

Through a combination of DIP switch settings and turning the
printer ON with certain buttons held down, you can enable or
disable special functions/features.
Warning: Never connect or disconnect interface cables
(or use a switch box) with power applied to
either the host or the printer. This may cause
damage to the interface circuitry in the printer/
host and is not covered by the warranty.
DIP Switch
1 2 3
Off Off Off
Off Off On
Off Off Off
Off On Off
Off On Off
DIP Switch Setting Meanings
OFF
Cover
4 PRINT
Closed Off
Off
Closed Off
Closed Off
On Open On
Open Off
Open On
On
Open Off
Off
Off Closed
Off
On
On Open
Off
ON
Button
FEED Interface
Off
RS-232C
On
Off
Off RS-232C
ON
Off
RS-232C
On
Off Bluetooth
Wireless
On
LAN
Bluetooth
Off
Wireless
LAN
On
55
Startup mode
Content
Normal printing mode
User test printing mode
HEX dump mode
Buzzer sound disabled
Buzzer sound enabled
Set Automatic peeling
printing
Set Manual peeling
printing
Normal printing mode
User test printing mode
Head check (printing
area) setting
Head check disabled