Oki LP470b User Manual page 54

subjected to a head check, follow the settings in the table below
(cover must be left open):
H.Check
setting
Normal Print
Area
Disable H.
Check
Barcode Print
Area
Disable H.
Check
You can check the current setting with a test printout as
described in "Performing a Test Print" on page 42.
When setting the Head Check options, the STATUS LED blinks
green, and turns into a steady green signal upon completion of
the setting. Turn off the printer ONLY when the STATUS LED is a
steady green light.
Status LEDs for the Online Command
Compatibility Mode
The printer can be set for compatibility with SBPL commands
(cover must be left open.
Compatibility
LP470-
compatible
online
commands
SBPL online
commands
You can check the current setting with a test printout as
described in "Performing a Test Print" on page 42.
When setting the online command compatibility options, the
STATUS LED blinks green, and turns into a steady green signal
upon completion of setting. Turn off the printer ONLY when the
STATUS LED is a steady green light.
DSW-1 DSW-2
OFF ON
OFF ON
ON OFF
ON OFF
DSW-1 DSW-2
ON ON
ON ON
DSW-3 DSW-4
OFF ON
OFF ON
OFF ON
OFF ON
DSW-3 DSW-4
ON ON
ON ON
54
Other keys
hold down
PRINT button
hold down
FEED button
hold down
PRINT button
hold down
FEED button
Other keys
hold down
PRINT button
hold down
FEED button