Status Leds For Printing Modes - Oki LP470b User Manual

the setting. Turn off the printer ONLY when the STATUS LED is a
steady green light.

Status LEDs for Printing Modes

Available modes include Normal, Test Print, Head Check
Setting and Online Command Setting mode.
Status LEDs for Normal Mode
Operational State
START OF PRINTING
ONLINE
OFFLINE
STANDBY (after 5
seconds of inactivity)
Note: The Battery indicator (only available on the Bluetooth/
WLAN model) remains lit even when the printer is
OFFLINE. During the Standby state, the printer resumes
normal operational status upon sensing any incoming
data or pressing of the buttons.
Status LEDs for the Test Print Mode
Operational State
ENTERING TEST
PRINT MODE
START OF TEST
PRINT
DURING TEST PRINT
END OF TEST PRINT
Status LEDs for the Head Check Setting Mode
Head checking can be applied to one of two areas: the normal
print area and the barcode print area. To specify the area
STATUS LED
Orange
Green
OFF
Green
STATUS LED
Orange
Green
Green
OFF
53
LED Action
Steady
Steady
NA
Blinks every 4
seconds
LED Action
Steady
Blinks
Steady
NA