Oki LP470b Installation Instructions

Installation Instructions
Battery Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Chargeur de bloc-pile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Cargador de pila . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Carregador de bateria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Use to charge the battery pack without having
the printer connected to an AC outlet.
WARNING Never use the battery charger with any
other battery pack except the specified
type. Doing so can rupture the battery,
or cause leakage, fire or electric
shocks.
WARNING Do not use wet hands to replace the
battery pack or to unplug the battery
charger. Doing so increases the risk of
electric shock.

Charging the Battery Pack

1. Connect the charger to the wall outlet.
The POWER lamp lights red.
2. Align the battery pack with its metal contacts
facing front, and slide it into the charger.
The CHARGE lamp lights red when charging
starts. It turns off when the battery pack is fully
charged.
3. Slide the battery pack out of the charger.
Notes
• If the POWER lamp does not light when you
turn on the power, check the power cord
connection.
• If the CHARGE lamp does not light at the start
of charging, make sure the battery pack is
firmly mounted into the charger. Poor
mounting of the battery pack may result in
faulty charging.
• When a fully charged battery pack is placed in
the charger, the CHARGE lamp turns on and
then off.
• When you are charging a battery pack that has
not been used for a long time, the CHARGE
lamp may blink for a while. This does not
indicate an error. You can continue charging.
• The battery pack can be recharged about 300
times (when used at normal temperatures). If
the battery pack is fully charged but runs out
quickly, replace it with a new battery.

Charging Time

It takes about 1.5 hours for a fully discharged
battery pack to return to a fully charged state.
English