Oki LP470b User Manual page 69

LCD Error Messages (WLAN Model Only)
STATUS (LED)
Illegal Program
Error/
Flash ROM Error
Low Battery
Module Error
Wireless LAN
Bluetooth
Head Error
Cover Open
Paper End
Sensor Error
Buffer Near Full
Head Protect
*1) Electric field strength for wireless LAN is not displayed.
*2) Electric field strength for wireless LAN is displayed only when wireless
Description
No display on the
LCD
BATTER
ERROR
MODUL
ERROR
HEAD
ERROR
COVER
OPEN
PAPER
SENSO
NEAR
PROTECT
LAN is set as interface.
Remedy
Check Status LED for detail
Battery Error (Font 14x24 Dot)
• Shows low battery and battery Icon
blinks. (*2)
Module Error (Font 14x24 Dot)
• Shows module error was detected in
Wireless LAN or Bluetooth interface.
(*1)(*2)
Head Error (Font 14x24 Dot)
• Malfunction in the Print head. (*2)
Cover Open error • Shows top cover is
open.
• Close the cover
Paper End error (Font 14x24 Dot)
• Label paper supply has run out
• Load a new roll of label paper (*2)
Sensor Error (Font 14x24 Dot)
• Sensor malfunction or error. (*2)
Near Full error (Font 14x24 Dot)
• The buffer memory is nearly full.
• Cancel the status to return to previous
display.
Head Protect error (due to overheat)
(Font 14x24 Dot)
• The print head has overheated
• Wait for print head to cool down
69