Oki LP470b Installation Instructions

Installation Instructions
AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
L'adaptateur c.a. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Adaptador de CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Adaptador de CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
For operating the printer via an AC outlet. Can also
be used to charge a battery pack loaded inside the
printer.
WARNING Use only the specified AC Adapter
designed for your printer.
Cautions
Power
Do not use wet hands to unplug the AC
adapter. Doing so increases the risk of
electric shock.
Storing the Printer
If you have no plan to use the printer for
a long time, unplug the AC adapter from
the wall outlet.
Maintenance and Cleaning
For safe maintenance or cleaning of the
printer, make sure to remove the AC
adapter from the printer.
Installation
1. Remove the cover of the printer's DC input
jack (1) and connect the AC adapter's DC
output terminal (2) to it.
2. Connect the AC adapter to the wall outlet (3)
and turn on the power.
The POWER lamp turns green.
Important! Be sure to turn the printer power off
when removing the DC output terminal
of the AC adapter or disconnecting the
power source. Otherwise, the
information stored in the printer may
not be updated.
Note: A battery pack is unnecessary when an AC
adapter is used. If a battery pack and an AC
adapter are being used at the same time, the
printer will attempt to charge the battery
pack (if it is not already fully charged).
Charging Time
With the AC adapter, it takes about 5 hours for the
battery pack to reach full charge from a fully
discharged state.
English