Using The Bluetooth Interface - Oki LP470b User Manual

Using the Bluetooth Interface

To print using the Bluetooth-enabled version of the printer, you
need to have a Bluetooth-enabled computing device. Two more
steps are required.
1. Check the DIP Switches:
• The printer's DIP switches are factory set for
Bluetooth operation. Check that DIP switch 1 is OFF
and DIP switch 2 is ON. This is the main setting for
Bluetooth operation. In case you need to reset other
switches, refer to the full DIP-Switch table in the next
chapter, Interface Specifications.
2. Synchronize Bluetooth settings
• After setting the DIP-switches, the next step is to ensure
that both bluetooth devices are configured to operate with
the same PIN code and Authentication mode settings.
Refer to the instruction manual of the computing device for
details on how to set these parameters.
Note: When printing with the Bluetooth interface, the usable
range between the printer and the host may vary
depending on the usage environment and the capabilities
of the connected devices.
47