Part Names And Functions; Top Panel - Denon MC6000MK2 Owner's Manual

Part names and functions

Top panel

The top panel is explained for Serato DJ Intro.
For buttons not explained here, see the page indicated in parentheses ( ).
q
w
e
r
  
t
   
y

 

u
i
  
 
 
o

 
Q0
Q1
Q2
Q3
Q4

Q5 Q6 Q7 Q8

 

 

Q9 W0
q
Beats select knob (BEATS)
Rotate the knob to select the effect beats.
• Press this button for more than 1 second while
SHIFT
holding down Q0 to return the beat
settings to the default value.
w
Tap button (TAP)
Sets the BPM value used for the effects. Press
this button repeatedly to measure the BPM
value from the interval between presses.
E0
e
Effect adjustment knob
W9 Adjusts the effect balance.
r
Effects ON/OFF switching button
W8
Switches the effects ON/OFF.
SHIFT
• Hold down Q0 and press this button to
W7
select an effect for the slot.
W6
t
Channel assign ON / OFF switching button
(CH ASSIGN 1/2/3/4)
W5
W4 y
Loop point setting button (IN/OUT) ········· (15)
W3
Sets the loop in point and loop out point.
• Press this button during a loop to make fine
W2
adjustments (trimming) to the loop points
W1
using the jog wheel.
20
u
Auto loop/loop size adjustment buttons
(AUTO LOOP, –/+) ······································ (15)
AUTO LOOP
• switches auto loop ON/OFF.
–/+
• Use to adjust the loop size.
i
Hot cue button (HOT CUE 1/2/3/4) ·········· (15)
The following operations differ depending on
SAMPLE
whether Q2 are ON or OFF.
• OFF: Sets HOT CUE 1 – 4 points or cue
playback.
SHIFT
• Hold down Q0 and press this button to
delete each of the cue point settings.
• ON: Plays back the sample slot. If the sample
is currently being played, playback is started
again from the start of the sample.
SHIFT
• Hold down Q0 and press this button to
stop playing the sample slot.
o
Deck switching button (DECK) ·················· (12)
Q0
Shift button (SHIFT) ······················· (13, 15, 16)