Security Settings - Supermicro Supero X8DTH-6F User Manual

4-4

Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set fi rst.
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
The Options are Full Access, View Only, Limited, and No Access
•
Full Access: This feature grants the user the full read and write access to the
Setup Utility.
•
View Only: This feature allows the user to access the Setup Utility without mak-
ing any change to the settings.
•
Limited: This feature allows the user to access limited fi elds and making
changes.
4-23
Chapter 4: AMI BIOS