Security Settings - Supermicro X10DRL-LN4 User Manual

Table of Contents

Advertisement

VLAN
Select Enable for VLAN support. The default setting is Disable.
4-6

Security Settings

This menu allows the user to configure the following security settings for the
system.
Password Check
Select Setup for the system to prompt for a password at Setup. Select Always for
the system to prompt for a password at bootup and upon entering the BIOS Setup
utility. The options are Setup and Always.
Administrator Password
Use this feature to set the administrator password which is required before entering
the BIOS setup utility. The length of the password should be from 3 characters to
20 characters long.
User Password (Available after an Administrator Password is entered)
Use this feature to set the user password which is required to enter the BIOS setup
utility. The length of the password should be from 3 characters to 20 characters long.
Secure Boot Menu
The following items will display:
System Mode
Secure Boot
4-39
Chapter 4: AMI BIOS

Advertisement

Table of Contents
loading

Table of Contents