Appendix A Bios Error Beep Codes - Supermicro Supero X8DTH-6F User Manual

BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed whenever
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue
with the boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue with bootup. If
a fatal error occurs, you should consult with your system manufacturer for pos-
sible repairs.
These fatal errors are usually communicated through a series of audible beeps.
Beep Code
1 beep
5 short beeps, 1 long
beep
8 beeps
1 continuous beep w/
Front Panel OH LED on
Appendix A: BIOS POST Error Codes
Appendix A
BIOS Error Beep Codes
Error Message
Refresh
Memory error
Display memory
read/write error
System Overheat
A-1
Description
Circuits have been reset.
(Ready to power up)
No memory detected in the
system
Video adapter missing or with
faulty memory
1 continuous beep with the
front panel OH LED on