Supermicro Supero X8DTH-6F User Manual page 12

X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF User's Manual
P2-DIMM3A
P2-DIMM3B
FAN6
P2-DIMM2A
P2-DIMM2B
P2-DIMM1A
P2-DIMM1B
PHY
CPU2
Slot7 PCI-E 2.0 X8
Slot6 PCI-E 2.0 X8
Slot5 PCI-E 2.0 X8
Slot4 PCI-E 2.0 X8
LAN CTRL
Slot3 PCI-E 2.0 X8
BMC
Slot2 PCI-E 2.0 X8
Slot1 PCI-E 2.0 X8
COM2
TPM
Wake-On-LAN
JHB1
JPG1 JPB
Notes
1. Jumpers not indicated are for test purposes only.
2. " " indicates the location of Pin 1.
3. When DP4 is on, the onboard power connection is on. Make sure to unplug
the power cables before removing or installing components.
Warning! 1. To prevent damage to the power supply or motherboard,
please use a power supply that contains a 24-pin and two 8-pin power
connectors. Be sure to connect these connectors to the 24-pin (JPW1)
and the two 8-pin (JPW2,JPW3) power connectors on the motherboard.
Failure in doing so will void the manufacturer warranty on your power
supply and motherboard.
2. To avoid system overheating, be sure to provide adequate air fl ow to
the system.
Quick Reference
JPI2C1
Intel
5520
(IOH36D-2)
Intel
ICH10R
JBT1
(South Bridge)
SPI BIOS
I-SATA5
I-SATA3
SATA-SGPIO2
I-SATA4 I-SATA2
USB4/5 USB3
USB6/7
SATA-SGPIO1
1-4
JPW1 JPW2 JPW3
CPU1
PWR_LED
DP4
P1-DIMM1B
P1-DIMM1A
P1-DIMM2B
P1-DIMM2A
P1-DIMM3B
P1-DIMM3A
X8DTH
Rev. 2.01
Battery
Buzzer
Intel
SAS
FLASH
5520
(IOH36D-1)
LED5
SAS Activity
DP6
LSI
DP7
SAS2008
FAN4
I-SATA1 I-SATA0
RAID Key
JL1