Supermicro Supero X8DTH-6F User Manual page 78

X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF User's Manual
PCI-Express devices in order to enhance network connectivity and performance.
The options are Enabled and Disabled.
PCI-E Slots 1~7 x8
This feature allows the user to Enable or Disable any of the PCI slots. The
options are Enable and Disable.
Onboard LAN Option ROM Select
This feature allows the user to select the onboard LAN option ROM type. The op-
tions are iSCSI and PXE.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1 or LAN2 Option ROM. This is to boot
computer using a network interface. The options are Enabled and Disabled.
Load Onboard SAS Option ROM
Select Enabled to enable the onboard SAS Option ROM. This is to boot computer
using a network interface. The options are Enabled and Disabled.
Boot Graphics Adapter Priority
This feature allows the user to specify which graphics controller to be used as
the primary boot graphics controller. The options are Onboard VGA, Offboard
VGA, and PCI-E Slot 7.

Super IO Device Confi guration
Serial Port1 Address/ Serial Port2 Address
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2F8/IRQ3, and 2E8/IRQ3. The options for
Serial Port2 are Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, and 3F8/IRQ4.
Serial Port 2 Attribute
This feature allows the user to set COM 2 as a normal serial port or a virtual COM
port used for SOL (Serial Over LAN). The options are SOL, and COM.
4-14