Supermicro Supero X8DTH-6F User Manual page 85

•
Event Sensor Type
•
Event Sensor Number
•
Event Dir Type
•
Event Data.
Clear BMC System Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel
to keep the BMC System log. The options are OK and Cancel.
Caution: Any cleared information is unrecoverable. Make absolutely sure
that you no longer need any data stored in the log before clearing the
BMC Event Log.

Set LAN Confi guration
This feature allows the user to confi gure the IPMI LAN settings.
Channel Number
This feature allows the user to enter a channel number to be used for the IPMI LAN
connection. This is initially set to [01].
Channel Number Status
This feature indicates the status of the channel number selected above.
IP Address Source
This feature allows the user to select the source of the IP address for the system. If
Static is selected, the user will need to manually enter the IP address for the system.
If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Confi guration
Protocol) server in the network that the system is attached to, and request the next
available IP address. The options are DHCP and Static. If Static is selected, the
following items will be available for confi guration.
IP Address
This feature allows the user to enter the IP address for your system. This should
be in decimal and in dotted quad form (i.e., 192.168.10.253). The value of each
three-digit number separated by dots should not exceed 255.
Subnet Mask
This item shows which subnet this system belongs to. The value of each three-digit
number separated by dots should not exceed 255.
4-21
Chapter 4: AMI BIOS