Supermicro Supero X8DTH-6F User Manual page 31

Memory Support for the Motherboard w/5600 Processors Installed
•
1.5V DIMMs
1.5V RDIMM Population for the Motherboard w/5600 Processors Installed
DIMM DIMMs
Slots per Populated
Channel per Channel
2 1
2 1
2 2
2 2
Note 1: 1333 RDIMMs MHz will run at 1066 MHz (-BIOS automatic downgrading)
Note 2: 1333/1066 RDIMMs MHz will run at 800 MHz (-BIOS automatic downgrading)
Note 3: MIxing of 1.35V and 1.5V DIMMs is not recommended.
1.5V UDIMM Population for the Motherboard w/5600 Processors Installed
DIMM DIMMs
Slots per Populated
Channel per Channel
2 1
2 2
Note 1: 1333 MHz for two DIMMs per channel is supported when Unbuf./ECC DIMMs are used.
Note 2: MIxing of 1.35V and 1.5V DIMMs is not recommended.
•
1.35V DIMMs
1.35V RDIMM Population for the Motherboard w/5600 Processors
DIMM DIMMs
Slots per Populated
Channel per Channel
2 1
2 1
2 2
2 2
Note 1: 1333/1066 QR RDIMMs MHz will run at 800 MHz (-BIOS automatic downgrading)
Note 2: 1333 SR/DR RDIMMs MHz will run at 800 MHz (-BIOS automatic downgrading)
Note 3: 1333 SR/DR/QR RDIMMs MHz will run at 800 MHz (-BIOS automatic downgrading)
Note 4: MIxing of 1.35V and 1.5V DIMMs is not recommended.
DIMM Type (Reg.= Speeds (in MHz)
Registered)
Reg. DDR3 ECC 800,1066,1333
Reg. DDR3 ECC 800 , 1066 (Note 1)
Reg. DDR3 ECC 800,1066, 1333
Reg. DDR3 ECC 800 (Note 2)
DIMM Type (Unb.=
Unbuffered)
Unb. DDR3 ECC/Non-ECC
Unb. DDR3 ECC/Non-ECC
Installed
DIMM Type (Reg.= Speeds (in MHz)
Registered)
Reg. DDR3 ECC 800,1066,1333
Reg. DDR3 ECC 800 (Note 1)
Reg. DDR3 ECC 800,1066 (Note 2)
Reg. DDR3 ECC 800 (Note 3)
2-9
Chapter 2: Installation
Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
SR or DR
QR
Mixing SR, DR
Mixing SR, DR, QR
Speeds (in MHz) Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
800,1066,1333 SR or DR
800,1066, 1333 Mixing SR, DR
Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
SR or DR
QR
Mixing SR, DR
Mixing SR, DR, QR