Supermicro Supero X8DTH-6F User Manual page 86

Super micro - server motherboard
Hide thumbs Also See for Supero X8DTH-6F:
Table of Contents

Advertisement

X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF User's Manual
Gateway Address
This is the IP address of the gateway in the network that the system is connected
to. This is usually a router.
Mac Address
The BIOS will automatically enter your system's Mac address; however it may be
over-ridden. Mac addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~ 9,
A, B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60).
BMC Watch Dog Timer Action
This feature allows the BMC to reset or power down the system if the operating
system hangs or crashes. The options are Disabled, Reset System, Power Down,
Power Cycle. If this feature is not set to Disabled, the following item will display.
BMC Watch Dog TimeOut [Min:Sec]
This feature sets a timed delay (in minutes or seconds) before a system powers
down or resets after an operating system failure is detected. The options are [5
Min], [1 Min], [30 Sec], and [10 Sec].
Event Log Confi guration
View Event Log
Use this option to view the System Event Log.
Mark all events as read
This option marks all events as read. The options are OK and Cancel.
Clear event log
This option clears the Event Log memory of all messages. The options are OK
and Cancel.
PCIE Error Log
Use this option to enable PCI-Express error (PERR) logging. The options are Yes
and No.
Memory ECC Error Log
Use this option to enable ECC Memory Error logging. The options are Yes and
No.
4-22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Supero x8dth-ifSupero x8dth-6Supero x8dth-i

Table of Contents