Table of Contents
Advertisement
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer
to p. 5-4 and the table on the right for
pin defi nitions.
Information LED
Connect an LED to the OH connection
on pins 7 and 8 of JF1 for UID and to
provide advanced warning of chassis
overheating and fan fail. Refer to p.
5-4 and the table on the right for pin
defi nitions. Refer to Chapter 3 for fur-
ther details on the control panel LED.
NIC2 (JLAN2) LED
The LED connections for JLAN2 are
on pins 9 and 10 of JF1. Attach an
LED cable to display network activity.
See p. 5-4 and the table on the right
for pin defi nitions.
NIC1 (JLAN1) LED
The LED connections for JLAN1 are
on pins 11 and 12 of JF1. Attach an
LED cable to display network activity.
See p. 5-4 and the table on the right
for pin defi nitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. This LED
is used to display all IDE/SAS/SATA
activity. See the p. 5-4 and table on
the right for pin defi nitions.
Chapter 5: Advanced Serverboard Setup
PWR Fail LED
Pin Defi nitions (JF1)
Pin#
Defi nition
5
Vcc
6
Ground
OH/Fan Fail/UID LED
Pin Defi nitions (JF1)
Pin#
Defi nition
7
Vcc
8
Ground
NIC2 LED
Pin Defi nitions (JF1)
Pin#
9
10
NIC1 LED
Pin Defi nitions (JF1)
Pin#
11
12
Pin Defi nitions (JF1)
Pin#
13
14
5-17
OH/Fan Fail Indicator
Status
State
Defi nition
Off
Normal
On
Overheat
Flash-
Fan Fail
ing
Defi nition
Vcc
Ground
Defi nition
Vcc
Ground
HDD LED
Defi nition
Vcc
HD Active
Advertisement
Table of Contents
