S
S
UPER
ERVER 6016T-MTHF/6016T-MTLF User's Manual
5-11 Onboard Indicators
LAN Port LEDs
The LAN1/2 Ethernet ports (located
beside the VGA port) and the dedicated
IPMI LAN port each have two LEDs.
One LED indicates activity when blink-
ing while the other LED may be green,
amber or off to indicate the speed of the
connection. See the table on the right for
the functions associated with the con-
nection speed LED.
Onboard Power LED
An Onboard Power LED is located at LE1.
When this LED is lit, the system is on. Be
sure to turn off the system and unplug the
power cord before removing or installing
components. See the table at right for
more information.
Rear UID LED
The rear UID LED is located at LE2 on the
backplane This LED is used in conjunc-
tion with the front UID LED on the Front
Control Panel and the rear UID switch to
provide easy identifi cation of a system
that might be in need of service. Refer to
UID button/LED on pages 3-3 and 5-19
for more information.
(Connection Speed Indicator)
LED Color
Off
Green
Amber
Onboard PWR LED
LED Color
Off
Green
5-22
LAN LED
Defi nition
10 Mb/s
100 Mb/s
1 Gb/s
Defi nition
System Off (PWR cable
not connected)
System Power On