Table of Contents
Advertisement
S
S
UPER
ERVER 6016T-MTHF/6016T-MTLF User's Manual
Memory Support
The X8DTL-iF supports up to 48 GB of registered ECC DDR3-1333/1066/800 MHz
SDRAM or up to 24 GB of unbuffered ECC DDR3-1333/1066/800 MHz SDRAM
in 6 DIMM slots. See the product page on the Supermicro Web site for updates to
supported memory.
Populating DIMMs
Follow the tables below when installing memory.
For One CPU (CPU1) Installed (Populate the CPU1 DIMM slots)
3 DIMMs
P1-1A
For One CPU (CPU2) Installed (Populate the CPU2 DIMM slots)
3 DIMMs
P2-1A
Branch 0
6 DIMMs
P1-1A
DIMM
DIMMs
Slots per
Populated
Channel
per Channel
3
1
3
1
Notes: Due to OS limitations, some operating systems may not show more than
4 GB of memory.
Due to memory allocation to system devices, the amount of memory that remains
available for operational use will be reduced when 4 GB of RAM is used. The
reduction in memory availability is disproportional. (See the following table.)
Populating DIMMs for Optimal Performance
Branch 0
Branch 1
P1-2A
Populating DIMMs for Optimal Performance
Branch 0
Branch 1
P2-2A
Populating DIMMs for Optimal Performance
For Two CPUs Installed
CPU1 DIMMs
Branch 1
Branch 2
P1-2A
P1-3A
Memory Population Table
DIMM Type (Reg.=
Registered)
Reg. DDR3 ECC
Reg. DDR3 ECC
5-10
Branch 2
P1-3A
Branch 2
P2-3A
CPU2 DIMMs
Branch 0
Branch 1
Branch 2
P2-1A
P2-2A
P2-3A
Speeds (in MHz)
Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
800,1066,1333
SR, DR
800,1066,
QR
Advertisement
Table of Contents
