Advanced Chipset Control - Supero SuperServer 6016T-MTHF User Manual

SUPERSERVER 6016T-MTHF/6016T-MTLF User's Manual
C1 Auto Demotion
When this feature is enabled, the CPU will conditionally demote C3, C6 or C7 re-
quests to C1 based on un-core auto-demote information. The options are Enabled
and Disabled.
C3 Auto Demotion
When this feature is enabled, the CPU will conditionally demote C6 or C7 requests
to C3 based on un-core auto-demote information. The options are Enabled and
Disabled.
ACPI T State
Select Enabled to report CPU throttling state in ACPI. The options are Enabled
and Disabled.
DCA Technology
This feature accelerates the performance of a TOE device. A TOE device is a
specialized, dedicated processor installed on an add-on card or a network card to
handle some or all packet processing of this add-on card. For this motherboard, the
TOE device is built inside the Intel South Bridge chip. This feature is supported only
by some types of processors. The options are Enabled and Disabled.
DCA Prefetch Delay
A DCA Prefetch is used with TOE components to prefetch data to shorten execution
cycles and to maximize data processing effi ciency. Prefetching too frequently can
saturate the cache directory and delay necessary cache accesses. This feature
reduces or increases the frequency the system prefetches data to maximize data
transfer effi ciency. The options are [8], [16], [32], [40], [48], [56], [64], [72], [80],
[88], [96], [104], [112], [120]
Advanced Chipset Control
The items included in the Advanced Settings submenu are listed below:
QPI & IMC Confi guration
QuickPath Interconnect (QPI) is the connection between the CPU and the moth-
erboard's I/O hub. Use this feature to modify speed and power management set-
tings.
QPI Links Speed
This feature selects QPI's data transfer rate. The options are Slow-mode, and
Full Speed.
7-8