Accessing the Inside of the SuperServer 6016T-MTHF/6016T-MTLF
Release buttons
2-7
Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the SATA drives
and their backplane have been properly installed and all essential connections
have been made.
Checking the Drives
1. All drives can be accessed from the front of the server. The SATA disk drives
can be installed and removed from the front of the chassis without removing
the top chassis cover.
2. Refer to Chapter 6 if you need to install an optional DVD-ROM drive to the
system.
3. Depending upon your system's confi guration, your system may have one or
more drives already installed. If you need to install drives, please refer to the
appropriate section in Chapter 6.
Checking the Airfl ow
1. Airfl ow is provided by four high-performance 4-cm input fans. The system
component layout was carefully designed to promote suffi cient airfl ow through
the small 1U rackmount space.
Chapter 2: Server Installation
Figure 2-4.
2-9