Registering Bluetooth Device (Pairing); Getting Started Of Bluetooth - Kenwood KDC-BT652U Instruction Manual

Getting Started of Bluetooth

Registering your Bluetooth device
with this unit (Pairing)
Press and hold
1
"PAIRING" is displayed.
Any of the following is displayed
■ ■
depending on Bluetooth device
registration condition:
– "PLEASE PAIR YOUR PHONE": When
registering a Bluetooth device for the
first time.
– "(device name)": When a Bluetooth
device has already been registered.
– "DEVICE FULL": When a maximum of five
Bluetooth devices have already been
registered.
To cancel the pairing mode, press
■ ■
When registering a Bluetooth device for the
first time (Registering a Bluetooth device)
"PLEASE PAIR YOUR PHONE" is displayed.
2
Start registering this unit by operating
3
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select "KENWOOD BT CD/R-5T1" from the
list of found units.
Input the PIN code ("0000") in the
4
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
"0000" as the default. You can change this
16
English
VOICE
PAR
Press and hold to pairing mode.
to enter pairing mode
.
iPod
code. Refer to [PIN CODE EDIT] under
<Bluetooth Setup> (page 23).
"(device name)" is displayed. Press the
5
volume knob.
The receiver is connected to a Bluetooth
6
device, with "HF CONNECT" or "AUD
CONNECT" displayed, and exits the
pairing mode.
If an error code is displayed during paring,
■ ■
see <Troubleshooting> (page 30).
When a Bluetooth device has already been
registered, or maximum of five Bluetooth
devices have already been registered
(Selecting a Bluetooth device)
"(device name)" or "DEVICE FULL" is
2
displayed.
Turn the volume knob to select a
3
Bluetooth device name.
To register a new Bluetooth device, select
■ ■
"[PAIRING]", then go to "When registering
a Bluetooth device for the first time."
Press the volume knob.
4
Turn the volume knob to select the
5
profile for the device to connect.
"HANDSFREE"/ "AUDIO": The device can
■ ■
be connected using either a hands-free
or audio profile.
"HF/AUD": The device is can be connected
using both hands-free and audio profiles.