Kenwood KDC-BT652U Instruction Manual page 32

Symptom
"NO ENTRY" appears.
"HF DISCONCT" appears.
"AUD DISCONCT" appears.
"HF ERROR 07" appears.
"HF ERROR 68" appears.
"HF ERROR 89" appears.
"UNKNOWN" appears.
"DEVICE FULL" appears.
"PIN CODE NG" appears.
"CONNECT NG" appears.
"PAIRING NG" appears.
"NO ACTIVE DVC" appears.
The sound from the Bluetooth audio player is
discontinuous.
32
English
The cell-phone has not been registered (pairing).
The unit cannot communicate with the cell-phone.
The unit cannot communicate with the audio player.
The memory cannot be accessed. Turn off the power and on again. If this message still
appears, press the reset button on the control unit.
The unit cannot communicate with the cell-phone. Turn off the power and on again. If
this message still appears, press the reset button on the control unit.
Update of the Bluetooth firmware has failed. Retry it.
The Bluetooth device cannot be detected.
5 Bluetooth device have already been registered. No more Bluetooth device cannot
be registered.
The PIN code is wrong.
The unit cannot be connected to the device.
Pairing error.
No cell-phone is connected. Connect your cell-phone before starting voice
recognition.
Another Bluetooth device is affecting the Bluetooth communication. Turn off
■ ■
another Bluetooth device. Move another Bluetooth device away from this unit.
Another Bluetooth device or profile is used for communication. The downloading of
■ ■
the Phone book disconnects the sound.
Remedy/Cause