Selecting App & Ipod Control Mode; Adjust [Settings] Mode Settings - Kenwood KDC-BT652U Instruction Manual

Cd receiver
Table of Contents

Advertisement

Available languages

Available languages

Selecting App & iPod Control Mode
Press number button 5 (iPod) repeatedly
to make a selection.
MODE ON :
Control iPod from the iPod *. "APP&iPod
MODE" appears on the display.
MODE OFF: Control iPod from the unit.
* You can still control play/pause, select files, fast-
forward/reverse files from the unit.

Adjust [SETTINGS] mode settings

While listening to an iPod or KENWOOD Music
Editor media ...
Press the volume knob to enter
1
[FUNCTION] mode.
Turn the volume knob to select
2
[SETTINGS], then press to enter.
Handling discs
Do not touch the recording surface of the
■ ■
disc.
Do not stick tape etc. on the disc, or use a
■ ■
disc with tape stuck on it.
Do not use any accessories for the disc.
■ ■
Clean the disk by moving the cloth
■ ■
outward from the center of the disc.
Discs that cannot be used
This unit can only play the CDs with:
■ ■
A disc that is not round.
■ ■
A disc with coloring on the recording
■ ■
surface or a disc that is dirty.
You cannot play a Recordable/ReWritable
■ ■
About the Audio file
Playable Audio files:
■ ■
MP3 (.mp3), WMA (.wma), AAC-LC (.m4a)
Playable disc media: CD-R/RW/ROM
■ ■
Playable disc file formats: ISO 9660 Level
■ ■
1/2, Joliet, Romeo, Long file name.
Playable USB devices: USB mass storage
■ ■
class
Playable USB device file systems:
■ ■
FAT16, FAT32
12
English
Turn the volume knob to select [SKIP
3
SEARCH], then press to enter.
Turn the volume knob to make a
4
selection, then press to confirm.
0.5% (initial)/ 1%/ 5%/ 10% : Sets the ratio
of skip when searching for a song in Music
Search mode.
(Holding 4 / ¢ skips songs at 10%
regardless of the setting made.)
Hold
to finish the procedure.
5
Clean the disc with a dry silicon or soft
■ ■
cloth. Do not use any solvents.
When removing a disc from this unit, pull it
■ ■
out horizontally.
If the center hole or outside rim of a disc
■ ■
has burrs, remove them before inserting
a disc.
disc that has not been finalized. (For the
finalization process, refer to the instruction
manual that came with your disc writing
software or your disc recorder.)
3-inch CD cannot be used. An attempt
■ ■
to insert using an adapter can cause
malfunction.
Although the audio files are complied with
the standards listed above, the play maybe
impossible depending on the types or
conditions of media or device.
Detailed information and notes about the
■ ■
playable audio files are stated in an online
manual on the following site:
www.kenwood.com/cs/ce/audiofile/

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-x696

Table of Contents