Front Display - Marantz NR1403 Owner's Manual

Language
Set the language for display on the menu screen.
English / Español
"Language" can also be set by the following procedure. However, the menu screen is not displayed.
Following the display content to make the setting.
PRESET CH –
1. Press and hold the main unit's
"V.Format : <NTSC>" appears on the display.
DISPLAY
2. Press the main unit's and set "Lang. :<ENGLISH>".
PRESET CH + PRESET CH –
3. Use the main unit's or
STATUS
4. Press the main unit's to complete the setting.
Default settings are underlined.
Setting details
STATUS
and for at least 3 seconds.
and set the language.
Auto Standby
When you do not perform any operation on this unit with no audio or video input for a specified time,
this unit automatically enters the standby mode. Before it enters the standby mode, "Auto Standby" is
displayed on the display of this unit and the menu screen.
30min : The unit goes into standby after 30 minutes.
60min : The unit goes into standby after 60 minutes.
Off : The unit does not go into standby automatically.

Front Display

Set the display on/off setting.
Setting items
On : Display is always on.
Display
Auto OFF : Display is off except when showing the status display.
Off : Display is always off.
This can also be set by pressing
Each time
below.
NOTE
When "Display" is set to "Off", the display turns off and appears as if
there is no electricity.
76
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
DISPLAY
on the main unit.
DISPLAY
is pressed, the setting is changed as shown
On Auto Off
Off
General