Marantz NR1403 Owner's Manual page 77

Setting items
Crossovers Crossover : Set the crossover frequency.
Set the maximum frequency • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz
of the bass signal output / 250Hz / Individual : Set the crossover frequency for all speakers.
from each channel to See the speaker manual for information concerning speaker crossover
the subwoofer. Set the frequency.
Crossover Frequency to
The following settings can be set when the "Crossover" setting is set to
suit the bass reproduction
"Individual".
capability of the speaker
• Front / Center / Surround : Select speaker for setting of crossover
being used.
frequency.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz : Set the crossover frequency.
• "Crossovers" can be set when the "Bass" – "Subwoofer Mode"
(vpage 72) setting is "LFE+Main", or when you have a speaker that
is set to "Small".
• Always set the crossover frequency to "80Hz". When using small
speakers, however, we recommend setting the crossover frequency to
a higher frequency.
• For speakers set to "Small", sound below the crossover frequency
is cut from the sound output. The cut bass sound is output from the
subwoofer or front speakers.
• The speakers that can be set when "Individual" is selected differ
depending on to the "Subwoofer Mode" setting (vpage 72).
• When "LFE" is selected, speakers set to "Small" at "Speaker Config."
can be set. If the speakers are set to "Large", "Full Band" is displayed
and the setting cannot be made.
• If set to "LFE+Main", this setting can be made regardless of the
speaker size.
Speakers
Setting details
74