Subwoofer Level - Marantz NR1403 Owner's Manual

Marantz - slimline 250w 5.1-ch. 3d pass through a/v home theater receiver
Hide thumbs Also See for NR1403:
Table of Contents

Advertisement

Tone
Adjust the tonal quality of the sound.
Setting items
Tone Control
On : Allow tone adjustment (bass, treble).
Set the tone control function
Off : Playback without tone adjustment.
to "On" and "Off".
"Tone Control" can be set when "Dynamic EQ ® "
set to "Off".
NOTE
The tone cannot be adjusted in the "DIRECT" or "PURE DIRECT" mode.
Bass
–6dB – +6dB (0dB)
Adjust bass.
"Bass" can be set when the menu "Tone Control" setting is "On".
Treble
–6dB – +6dB (0dB)
Adjust treble.
"Treble" can be set when the menu "Tone Control" setting is "On".
Dialogue Level
Sets the output level to clarify the dialogue output from the center channel.
Setting items
Dialogue
–12dB – +12dB (0dB)

Subwoofer Level

Sets the subwoofer on/off and its output level.
Setting items
Subwoofer
On : The subwoofer is used.
Turn subwoofer output on
Off : The subwoofer is not used.
and off.
NOTE
This can be set when the sound mode is "DIRECT" or "PURE DIRECT"
(vpage 
38)
"LFE+Main".
Subwoofer Level
–12dB – +12dB (0dB)
Set the subwoofer output
level.
Setting details
(vpage 
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
and
the
"Subwoofer
Mode"
(vpage 
M-DAX
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
62) is
Setting items
M-DAX
Off : Do not use M-DAX.
Set the mode for M-DAX.
Low : Optimized mode for compressed sources with normal highs.
Middle : Apply suitable bass and treble boost for all compressed sources.
High : Optimized mode for compressed sources with very weak highs.
• This item can be set with analog signals or PCM signal (Sample rate =
• "M-DAX" settings are stored for each input source.
• When set to "Off", the M-DAX indicator on the front panel switches off.
• This cannot be set when the surround mode is set to "DIRECT" or
• This can also be set by pressing
72)
is
60
Default settings are underlined.
Setting details
44.1/48 kHz) is input.
"PURE DIRECT".
M-DAX
.
M-DAX
Each time
is pressed, the setting is
changed as shown below.
Off
Low
High
Middle
Audio

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents