How To Make Detailed Settings; Menu Map - Marantz NR1403 Owner's Manual

How to make detailed settings

Menu map

For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items
Surr.Parameter
Tone
Dialogue Level
Audio
Subwoofer Level
M-DAX
Audio Delay
Volume
Audyssey
Manual EQ
HDMI Setup
Volume Display
Info.Display
Video
Audio Display
TV Format
Digital Assign
Source Rename
Hide Source
Inputs
Source Level
Input Select
Video Source
Description
Adjusts surround sound parameters.
Adjusts the tonal quality of the sound.
Sets the output level to clarify the dialogue
output from the center channel.
Sets the subwoofer on/off and its output level.
Expands the low and high frequency components
of compressed audio to enable richer audio
playback.
Compensates for incorrect timing between video
and audio.
Set the volume setting.
Makes Audyssey MultEQ ® , Audyssey Dynamic
EQ ® and Audyssey Dynamic Volume ® settings.
Uses the graphic equalizer to adjust the tone of
each speaker.
Makes settings for HDMI video/audio output.
Sets where to display the master volume level.
Displays status of operation temporarily when
the sound mode is changed or input source is
switched. You can set whether or not to show
each of these status displays.
Sets how long each menu is displayed when the
input source is "TUNER".
Set the video signal format to be output for the
TV you are using.
Changes input connector assignment.
Changes the display name for this source.
Remove from the display input sources that are
not used.
Adjusts the playback level of the audio input.
Sets the audio input mode and decode mode.
Video of another input source is played back
combined with the playing audio.
Page Setting items Detailed items
Audyssey ® Setup
59
60
60
Manual Setup
Speakers
60
60
Language
Auto Standby
61
General
61
61
63
Front Display
Information
65
65
Setup Lock
66
Perform the installation, connection, and setup procedures to prepare the
unit for operation following guidance.
Setup
66
Assistant
66
68
69
69
69
69
70
54
Description
The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
Perform when setting the speakers manually
or when changing settings made in Audyssey ®
Setup.
Sets the language for display the menu on the
TV screen.
When you do not perform any operation on this
unit with no audio or video input for a specified
time, this unit automatically enters the standby
mode. Before it enters the standby mode, "Auto
Standby" is displayed on the display of this unit
and the menu screen.
Set the display on/off setting.
Show information about receiver settings, input
signals, etc.
Protect settings from inadvertent change.
Page
21
72
76
76
76
77
77
C 7