Remote Lock Function - Marantz NR1403 Owner's Manual

n Canceling the Panel lock function
1
Press X ON/STANDBY while you press and hold
unit in standby mode.
2
PRESET CH + PRESET CH –
Press or
(z The currently set mode.)
3
STATUS
Press to enter the setting.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit using the remote control unit.
Panel lock function
DISPLAY and M-DAX with the
z
to select "FP LOCK Off".

Remote lock function

• When not connecting an IR receiver, disable the Remote lock function. When the function is enabled, you
can not perform operations with the remote control unit.
• By default, this function is disabled.
X ON/STANDBY
M-DAX
n Disabling the sensor function of the remote control unit
1
When the main unit is in standby mode, press
DISPLAY M-DAX
down and on the main unit.
2
PRESET CH + PRESET CH –
Press or
(z The currently set mode.)
3
STATUS
Press to enter the setting.
The infrared light receiving function is disabled.
n Enabling the remote sensor function
1
When the main unit is in standby mode, press
down DISPLAY and M-DAX on the main unit.
2
Press PRESET CH + or PRESET CH –
(z The currently set mode.)
3
Press STATUS to enter the setting.
The infrared light receiving function on the main unit is enabled.
52
PRESET CH + STATUS
DISPLAY
PRESET CH –
X ON/STANDBY
to select "RC LOCK On".
X ON/STANDBY
to select "RC LOCK z Off".
while holding
while holding