Audio Connection - Marantz NR1403 Owner's Manual

Connecting a DVD player
This section describes how to connect when your DVD player does not support HDMI connections.
For instructions on HDMI connections, see "Connecting an HDMI-compatible device" (vpage 7).
n Audio connection
The following methods are available for connecting to this unit. Use either of the methods to make
a connection.
The numbers prefixed with connectors indicate the recommendation order. The smaller the number is,
the higher playback quality is achieved.
a DIGITAL AUDIO COAXIAL connector
DIGITAL AUDIO OPTICAL connector
When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play
back surround sound.
When making this type of connection, you must change the settings on this unit.
(v Input connector setting )
n Video connection
The following methods are available for connecting to this unit.
The numbers prefixed with connectors indicate the recommendation order. The smaller the number is,
the higher playback quality is achieved.
a VIDEO IN (DVD) connector
This makes an analog video connection.
Input connector setting
When making the following connection, you must change the input connector settings.
a DIGITAL AUDIO COAXIAL connector
Change the default "CBL/SAT" to "DVD".
DIGITAL AUDIO OPTICAL connector
Change the default "TV AUDIO" to "DVD".
For how to change, see "Digital Assign" (vpage 68).
DVD player
AUDIO
COAXIAL OPTICAL
OUT OUT
a a
or
15
Connecting an HDMI-incompatible device
VIDEO
VIDEO
OUT
a