HP D5970A - NetServer - LCII Reference Manual page 52

Chapter 3
A. Begin with
the Server all
the way in.
F. Dress
cables
through
the fingers
of the
Cable
Guide.
E. Determine whether to tie wrap
cables into the inner and outer
sections of the Arm.
Figure 3-8. Routing Cables through the Arm
2. Arrange cables through the slot on the inner section of the Arm. Secure
cables in the cable arm using the hook-and-loop cables supplied with the
NetServer.
48
Procedure for Connecting and Routing Cables to the LC 2000r
B. Plug power and data
cables into the back of
the Server.
C. Gather
Cables at left
next to Cable
Management
Arm flange.
D. Arrange cables
through the inner
section of the arm,
around the elbow,
and through the
outer section.