About This Guide; Accessory Kit Contents - HP D5970A - NetServer - LCII Installation Manual

Chapter 1
CAUTION Do not attempt to use the existing processors or VRMs from
the HP NetServer LC II system board. They are not
compatible with the HP NetServer LC 3 system board.

About This Guide

This guide describes the procedure for installing a Pentium II or Pentium III
processor module into the HP NetServer E 60, LC 3, LH 3/3r, and LPr. It also
describes how to install a voltage regulator module (VRM) into the HP NetServer
LC 3, LH 3/3r, and LPr.
Chapter 2 tells how to prepare for the upgrade.
Chapter 3 describes the upgrade installation for HP NetServer LC 3 and
LH 3/3r.
Chapter 4 describes the upgrade installation for HP NetServer E 60 and
LPr.
Chapter 5 tells how to verify the installation.

Accessory Kit Contents

Verify the kit contents. This accessory kit includes the following items:
Pentium II or Pentium III processor module
Processor retaining latch (for HP NetServer LC 3 and LH 3/3r)
Voltage regulator module (VRM, for HP NetServer LC 3, LH 3/3r,
and LPr)
Label with settings for HP NetServer LC 3 and LH 3/3r system switches
Pentium III label for the front bezel (for Pentium III processors only)
HP NetServer Navigator CD-ROM for E-series NetServers
HP NetServer Navigator CD-ROM for L-series NetServers
HP NetServer Online Documentation CD-ROM
2
Introduction