4062-XXX
6. Detach the rear duplex guide spring (C).
7. Remove the duplex guide assembly, rear.
8. Remove the screw (D) securing the rear duplex guide handle to the assembly.
9. Remove the duplex guide assembly, rear.
Duplex assembly removal (T652, T654)
Note: When removing the duplex drive motor assembly, it does not need to be completely removed from the
machine. It may be allowed to gently hang out of the way by the harness.
1. Remove the duplex drive motor assembly. Go to
on page
4-19.
2. Remove the pick arm assembly. Go to
X654, and X656)" on page
3. Remove the four screws (A) securing the duplex assembly to the machine.
4-16
Service Manual
A
D
"Operator panel door assembly removal (models X651, X652,
4-49.
C
"Duplex drive motor assembly removal (T652, T654)"
B