4062-XXX
3. Remove the metal cover.
4. Remove the inner deflector. Go to
"Inner deflector removal (T650, T652, T654)" on page
4-25.
5. Remove the MPF pick solenoid assembly. Go to
"MPF pick solenoid assembly removal (T650, T652,
T654)" on page
4-39.
6. Remove the two screws (B) securing the alignment assembly to the machine.
B
Note: The adjuster screw (C) requires a hex wrench to loosen and tighten.
Note: The adjuster screw (C) can be accessed through the hole (D) in the system card.
7. Completely loosen the adjuster screw (C) securing the alignment assembly to the machine.
4-9
Repair Information