Background (Fog) - Lexmark T650 Service Manual

4062

Background (fog)

Leading edge
Trailing edge
Step
1 Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2
Check the media transfer route.
Is the media path free of contamination or debris.
3 Check the print cartridge for proper installation.
Is the above component properly installed?
4 Check the transfer roll assembly for contamination and
wear.
Is the above component free of excess wear and
contamination?
5 Check the HVPS card assembly for proper connection.
Is the above component connected properly?
6 Check the printhead installation.
Is the above component properly installed?
2-172
Service Manual
Check Yes
Go to step 2. Problem solved.
Go to step 3. Remove debris
or
contamination.
Go to step 4. Inspect, clean
and reinstall
replace the print
cartridge.
Go to step 5. Replace the
transfer roll
assembly.
Go to
roll assembly
removal (T650,
T652, T654)" on
page
Go to step 6. Replace the
connections.
Go to step 7. Reinstall and
adjust the
printhead
assembly.
Go to
"Printhead
assembly
removal
(T650)" on
page 4-60
"Printhead
assembly
removal (T652,
T654)" on
page
No
"Transfer
4-78.
or
4-61.