Media Tray Assembly; Side Guide; Wear Strips; Detection Of Media Size - Lexmark T650 Service Manual

4062-XXX
The rear media tray guide assembly can be adjusted to different media sizes by moving it to the front or rear.
The rear guide should come into contact with the media and hold it in position.

Side guide

The media tray assembly is designed so it can adapt to the media width in the media feed direction by moving
the side guide to the left or right.

Wear strips

The wear strips are designed to provide a fixed resistance to ensure that a single piece of paper is properly fed
out of the media tray. There are several types of wear strips available for custom or hard to feed media.

Media tray assembly

Wear strips
Side guides
End guides

Detection of media size

3-63
Diagnostic aids