Lexmark T650 Service Manual page 154

4062
Error
code or
message
983.00
984.00
985.01
985.02
2-120
Service Manual
Error contents
Communication
failure
Communication
failure
Service engine RFID
communications
Service engine RFID
communications
Description/Action
Invalid command received by
the paper port device.
Invalid command parameter
received by the paper port
device.
Generic hardware error
Printer having problems
communicating with radio
Possible repair actions
Replace the system card
assembly.
Go to "System card
assembly removal (T650,
T652, T654, T656)" on
page 4-76.
Replace the system card
assembly.
Go to "System card
assembly removal (T650,
T652, T654, T656)" on
page 4-76.
1. Check the RFID firmware
card, RFID interface card,
RFID cable, and RFID
option for correct
installation. Go to "High
capacity input tray (HCIT)
pick arm bracket
assembly removal" on
page 4-130.
2. Replace the RFID UHF
option.
Note: There can be no other
connectivity options installed
on printers that have the RFID
UHF option installed. If any
connectivity option is installed
(other than the RFID interface
card), a 985.xx error will occur
1. Check the RFID firmware
card, RFID interface card,
RFID cable, and RFID
option for correct
installation. Go to "High
capacity input tray (HCIT)
pick arm bracket
assembly removal" on
page 4-130.
2. Replace the RFID UHF
option.
Note: There can be no other
connectivity options installed
on printers that have the RFID
UHF option installed. If any
connectivity option is installed
(other than the RFID interface
card), a 985.xx error will occur