Preparing For Component Installation On; Installing A Dimm - HP Z210 Series User Manual

Installing a DIMM

To install a DIMM:
1.
Follow the procedures described in
the workstation for component installation.
2.
Push gently outward on the DIMM socket levers as shown in the following illustration.
Figure 7-1
3. Align the DIMM connector key with the DIMM socket key, and then seat the DIMM firmly in the
socket (1) as shown in the following illustration.
CAUTION:
DIMM damage, align these guides properly when installing DIMMs.
Figure 7-2
ENWW
Preparing for component installation on page 34
Opening DIMM socket levers
DIMMs and their sockets are keyed for proper installation. To prevent socket or
Seating the DIMM
to prepare
Installing a DIMM
39