Connecting The Monitors; Configuring The Monitors Using Microsoft® Operating Systems - HP Z210 Series User Manual

Connecting the monitors

NOTE:
HP-supported graphics cards typically support at least two monitors, as shown in this section;
some supported cards support more monitors. Refer to the graphics card documentation for details.
1. Connect the monitor cable adapters (1) (if required) to the workstation, then connect the
appropriate monitor cables to the adapters (2) or directly to the graphics card, as shown in the
following figure.
Figure 3-8
2.
Connect the other ends of the graphics cables to the monitors as shown below.
Figure 3-9
3.
Connect one end of the monitor power cord to the monitor and the other end to a grounded
power outlet.
Configuring the monitors using Microsoft® operating systems
Refer to Microsoft Help information or the Microsoft Web site for details about monitor configuration
procedures.
ENWW
Connecting the cables to the workstation
Connecting cables to the monitors
Adding monitors
23