Table of Contents
Advertisement
Removal and replacement procedures
Memory module
Description
1024-MB (PC2-6400, 800-MHz, DDR2)
2048-MB (PC2-6400, 800-MHz, DDR2)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
Remove the memory module:
✎
The top memory module slot is for expansion memory and the bottom slot is for primary memory.
1. Position the computer with the front toward you.
2. Loosen the Phillips PM2.5×7.0 captive screw 1 that secures the memory module compartment cover to the
computer.
3. Lift the right side of the cover 2, swing it to the left, and lift the cover off the computer 3. The memory
module compartment cover is included in the Plastics Kit, spare part number 498322-001.
4–10
"Battery" on page
4-7).
"Hard drive" on page
4-8).
Spare part number
482168-001
482169-001
Maintenance and Service Guide
Advertisement
Table of Contents
